Pagina 4 di 7
Xtremehardware
La nuova risorsa italiana di hardware e overclock
English Articles
Mounting scheme
Before inserting the reservoir into the case, you must select the aluminum mask to use among the supplied ones, silver or black, depending on what you like best.
Without the protective anti-scratch transparent sheet, tighten the mask to the reservoir body with the 4 provided screws with the Allen key. We then proceed with the fixing of the 2 connections, we have chosen two of the 13mm fittings from Phobya. Hooked up the hoses and tightened with clamps you can proceed with the placement of the reservoir in the prepared compartment, but without fix it, because we must top up the liquid when the level will drop due to the filling of the circuit. We recommend for novices to perform a leak test of the circuit to the external of the computer. To start the power supply without the system, and so without the pump, just short the green and black wires as shown in this page on our forum.
Corsair
Ultime Recensioni
